Yamaha Digital Sound Projector YSP-1000 - Manual (Page 79)

77
MANUAL SETUP
AD
V
ANC
ED
OPERA
T
ION
English
Use to manually adjust various parameters related to the
audio and video input.
SET MENU
→ MANUAL SETUP → INPUT MENU
■ INPUT ASSIGNMENT (Input assignment)
Use to assign the optical and coaxial digital input jacks of
this unit to other components if the initial settings of this
unit do not correspond to your needs. By assigning other
components to the input jacks on this unit, you can display
the name of the connected component in the front panel
display and OSD, and operate the component with the
input selector button of the same name. If you connect a
component to the input jacks of this unit and do not assign
it, the default component name for that input jack is
displayed in the front panel and OSD when selected.
• Select OPTICAL IN (1) to assign components to the
TV/STB OPTICAL DIGITAL IN jack of this unit.
Choices: TV, VCR
• Select OPTICAL IN (2) to assign components to the
AUX OPTICAL DIGITAL IN jack of this unit.
Choices: AUX, DVD
• Select COAX IN (3) to assign components to the DVD
COAXIAL DIGITAL IN jack of this unit.
Choices: DVD, AUX
• Select COMPONENT (1) to assign components to the
STB COMPONENT VIDEO IN jacks of this unit.
Choices: TV, VCR
• Select COMPONENT (2) to assign components to the
DVD/AUX COMPONENT VIDEO IN jacks of this
unit.
Choices: DVD, AUX
• Select COMPOSITE (3) to assign components to the
DVD/AUX VIDEO IN jack of this unit.
Choices: AUX, DVD
■ INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL INPUT jacks when you turn on
the power of this unit. For information on the types of
audio signals that can be output by this unit, see “Surround
modes and recommended sources” on page 46.
Choices: AUTO, LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signal is different from the setting, no sounds will
be produced.
INPUT MENU
. A)INPUT ASSIGNMENT
B)INPUT MODE
C)INPUT TRIM
D)INPUT RENAME
[ ]/[ ]:Up/Down
[ENTER]:Enter
3 INPUT MENU
p
p
OPTICAL IN
( . (1);;;;; TV
( . (1);;;; ( TV )
( . (2);;;;; AUX
( . (1);;;; ( AUX )
A)INPUT ASSIGNMENT 1/4
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p p
COAX IN
( . (3);;;;; DVD
( . (1);;;; ( DVD )
( .
A)INPUT ASSIGNMENT 2/4
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p p
COMPONENT
( . (1);;;;; TV
( . (1);;;; ( TV )
( . (2);;;;; DVD
( . (1);;;; ( DVD )
A)INPUT ASSIGNMENT 3/4
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p p
COMPOSITE
( . (3);;;;; AUX
( . (1);;;; ( AUX )
( .
A)INPUT ASSIGNMENT 4/4
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p p
)AUTO LAST
[ ]/[ ]:Select
[ENTER]:Retern
B)INPUT MODE
p p