Yamaha Digital Sound Projector YSP-1000 - Manual (Page 83)

81
ADJUSTING SYSTEM PARAMETERS
AD
V
ANC
ED
OPERA
T
ION
English
5
Press / to adjust the maximum volume
level.
Control range: 0 dB to –99.0 dB
Control step: 1 dB
6
Press STANDBY/ON on the front panel or on
the remote control to set this unit to the
standby mode.
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
You can protect the settings currently saved in the system
memory from being accidentally erased or unwantedly
changed.
1
Repeat steps 1 to 3 in “Setting the maximum
volume level” on page 80.
2
Press / on the remote control so that
MEMORY PROTECT is shown in the front
panel display.
3
Press ENTER.
ENTER
STANDBY/ON
or
Front panel Remote control
Protecting the current settings
ENTER
VOL
MEMORY PROTECT
ENTER