Protect: on, Protect: off, Factory preset – Yamaha Digital Sound Projector YSP-1000 User Manual

Page 84: Initializing the current settings

Advertising
background image

82

ADJUSTING SYSTEM PARAMETERS

4

Press / to switch between PROTECT: ON
and PROTECT: OFF.

• Select PROTECT: ON to activate the protection

feature.

• Select PROTECT: OFF to deactivate the protection

feature.

5

Press STANDBY/ON on the front panel or on
the remote control to set this unit to the
standby mode.

The new setting will be activated when you turn on
the power of this unit next time.

You can reset all of the parameters of this unit to the
factory presets. This procedure completely resets ALL the
parameters in SET MENU.

After performing the following procedure you must reset the
ROOM TYPE, SP POSITION and ROOM SIZE parameters to
match your surround sound environment.

1

Repeat steps 1 to 3 in “Setting the maximum
volume level” on page 80.

2

Press

/

on the remote control so that

FACTORY PRESET is shown in the front
panel display.

3

Press ENTER.

ENTER

VOL

PROTECT: ON

VOL

PROTECT: OFF

STANDBY/ON

or

Front panel

Remote control

Initializing the current settings

Note

ENTER

VOL

FACTORY PRESET

ENTER

Advertising