Yamaha Digital Sound Projector YSP-1000 User Manual
Page 96
94
TROUBLESHOOTING
■ Remote control
Problem
Cause
Remedy
See
page
The remote control does not work
and/or function properly.
Wrong distance or angle.
The remote control will function within a
maximum range of 6 m and no more than
30 degrees off-axis from the front panel.
24
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries.
24
You cannot operate external
components with this unit’s
remote control.
The external component you want to
operate is not selected as the input
source.
Press INPUT on the front panel or the
input selector buttons on the remote
control to select the external component
you want to operate.
39
The remote control code was not
correctly set.
Set the remote control code correctly or
try another code for the same
manufacturer using the “LIST OF
REMOTE CONTROL CODES” at the
end of this manual.
87
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Use the remote control supplied with the
external component.
—
The cursor buttons do not work
during SET MENU operation.
You pressed an input selector button.
Press TEST once.
—