Instrument and control functions – Yamaha YZF-R6T(C) User Manual

Page 26

Advertising
background image

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

cedure, only the settings made be-
fore the “SELECT” button was last
pushed will be applied.

In this mode, the multi-function dis-
play shows the current setting for
each function (except the shift tim-
ing indicator light activity function).

To adjust the display brightness

1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-

ton.

3. Turn the key to “ON”, and then, af-

ter five seconds, release the “SE-
LECT” button.

4. Push the “RESET” button to select

the desired display brightness lev-
el.

5. Push the “SELECT” button to con-

firm the selected display bright-
ness level. The control mode
changes to the shift timing indica-
tor light activity function.

To set the shift timing indicator light ac-
tivity function

1. Push the “RESET” button to select

one of the following indicator light
activity settings:

The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)

The indicator light will flash
when activated. (This setting
is selected when the indicator
light flashes four times per
second.)

The indicator light is deacti-
vated; in other words, it will
not come on or flash. (This
setting is selected when the
indicator light flashes once
every two seconds.)

2. Push the “SELECT” button to con-

firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.

To set the shift timing indicator light ac-
tivation function

NOTE:

The shift timing indicator light activation
function can be set between 10000
r/min and 16000 r/min. From 10000
r/min to 12000 r/min, the indicator light
can be set in increments of 500 r/min.
From 12000 r/min to 16000 r/min, the
indicator light can be set in increments
of 200 r/min.

1. Push the “RESET” button to select

the desired engine speed for acti-
vating the indicator light.

2. Push the “SELECT” button to con-

firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.

To set the shift timing indicator light de-
activation function

NOTE:

The indicator light deactivation
function can be set between
10000 r/min and 16000 r/min.
From 10000 r/min to 12000 r/min,

U5SL12E0.book Page 8 Monday, August 9, 2004 10:51 AM

Advertising