Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 32)

SCSI Connection Set Up
24
Choosing the Connection Method
9 9 9 9 The CRW2200S can be used as a supplemental drive or as a replacement
drive.
As a supplemental drive
If the casing of your computer has a spare 5.25-inch drive bay available, such as
with many tower-type computers, you can install the CRW2200S supplemental
to the computer’s existing CD-ROM drive.
As a replacement drive
If the casing of your computer does not have a spare 5.25-inch drive bay
available, such as with many desktop-type computers, you can replace the
computer’s existing CD-ROM drive with the CRW2200S.
Note
You cannot replace the computer’s existing CD-ROM drive with the CRW2200S using the
existing cable if the drive is an IDE type. In this case, use a 50-pin SCSI flat cable to connect
the CRW2200S.
CRW2200S
CRW2200S
CD-ROM drive