Preparation, Analog connections, English – Yamaha DVD-S557 User Manual
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
• Please refer to the manuals of other
equipment as necessary to make the
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit’s audio out
jack to the phono in jack of your audio
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using a commercially available cable.
You will need to set this unit’s digital
output to ALL (see page 19
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
Use the supplied audio pin cable to
connect AUDIO OUT L (left) and R (right)
jacks of this unit to corresponding input
jacks of your audio equipment such as
General Notes on connections
02_EN_body_DVD-S557_G.fm Page 5 Monday, January 31, 2005 12:52 PM