Yamaha DPX-1300 - Manual (Page 20)

16
You can use the following three methods to connect to computer devices. Be sure to use cables with jacks that match the connectors and
jacks you wish to use. The HDMI terminal does not support PC signals.
Connecting to computer devices
HDMI DVI
G/Y B/P B /C B R/P R /C R
INPUT A
HD/SYNC VD
OUT IN
REMOTE TRIGGER OUT
S VIDEO VIDEO
INPUT B
RGB/YP B P R /YC B C R
RS-232C
D4 VIDEO
D-Sub monitor
cable BNC monitor cable
Monitor output terminal
Computer devices
Use the supplied trigger-out DC plug to control external
components.
Be sure to solder the wires from an external component to the
plug terminals with the correct polarities, as illustrated at left.
Warning
• Soldering the wires to terminals with incorrect polarity may
cause bodily injury or may damage this unit and the
external component connected to this unit with this cable.
Information for installers
(for US model only)
+
polarity (inside)
-
polarity (outside)
(GND)
+
polarity
-
polarity
Input
INPUT A
INPUT B
DVI
Signal type
RGB (Analog)
RGB (Analog)
RGB (Digital)
Connector type
BNC jack x 5
D-sub 15 pin
DVI connector
DVI cable
11_DPX-1300_E.p65 9/20/05, 4:00 PM 16