Yamaha YZFR1Y(C) - Manual (Page 27)

INSTRUMENT AND CONTROL FUNCTIONS
4-10
4
The instantaneous fuel consumption
display can be set to either “km/L”,
“L/100 km” or “MPG”.
● When the display is set to “km/L”,
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
● When the display is set to “L/100
km”, the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
● When the display is set to “MPG”,
the distance that can be traveled
on 1.0 Imp.gal of fuel under the
current riding conditions is shown.
To switch between the instantaneous
fuel consumption displays, push the
“SELECT” button for one second when
one of the displays is shown.
TIP
If traveling at speeds under 10 km/h
(6.0 mi/h), “_ _._” is displayed.
Average fuel consumption mode
The average fuel consumption display
can be set to either “AV_ _._ km/L”,
“AV_ _._ L/100 km” or “AV_ _._ MPG”.
This display shows the average fuel
consumption since it was last reset.
● When the display is set to “AV_ _._
km/L”, the average distance that
can be traveled on 1.0 L of fuel is
shown.
● When the display is set to “AV_ _._
L/100 km”, the average amount of
fuel necessary to travel 100 km is
shown.
● When the display is set to “AV_ _._
MPG”, the average distance that
can be traveled on 1.0 Imp.gal of
fuel is shown.
To switch between the average fuel
consumption displays, push the “SE-
LECT” button for one second when one
of the displays is shown.
To reset the average fuel consumption
display, select it by pushing the “SE-
LECT” button, and then push the “RE-
SET” button for at least one second.
TIP
After resetting an average fuel con-
sumption display, “_ _._” is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).
Transmission gear display
1. Average fuel consumption
1
1. Neutral indicator light “ ”
2. Transmission gear display
2
1
U14B10E0.book Page 10 Friday, November 21, 2008 9:38 AM