Instrument and control functions – Yamaha YZFR1Y(C) User Manual

Page 30

Advertising
background image

INSTRUMENT AND CONTROL FUNCTIONS

4-13

4

This mode allows you to make changes
to six settings by performing the follow-
ing steps.

1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-

ton.

3. Turn the key to “ON”, and then re-

lease the “SELECT” button after
five seconds. The display bright-
ness function is selected.

4. Push the “SELECT” button to

switch the functions in the order
below.

a. Display brightness:

This function allows you to ad-
just the brightness of the dis-
plays and tachometer to suit
the outside lighting conditions.

b. Shift timing indicator light activ-

ity:
This function allows you to
choose whether or not the indi-
cator light should be activated
and whether it should flash or
stay on when activated.

c. Shift timing indicator light acti-

vation:

This function allows you to se-
lect the engine speed at which
the indicator light is activated.

d. Shift timing indicator light deac-

tivation:
This function allows you to se-
lect the engine speed at which
the indicator light is deactivat-
ed.

e. Shift timing indicator light

brightness:
This function allows you to ad-
just the brightness of the indi-
cator light to suit your
preference.

f. Throttle opening position dis-

play:
This function allows you to
choose whether or not to show
the throttle opening position
display.

TIP
The display shows the current setting
for each function, except the shift timing
indicator light activity function.

To adjust the brightness of the multi-
function meter displays and tachometer

1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-

ton.

3. Turn the key to “ON”, and then re-

lease the “SELECT” button after
five seconds.

4. Push the “RESET” button to select

the desired brightness level.

5. Push the “SELECT” button to con-

firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.

To set the shift timing indicator light ac-
tivity function

1. Push the “RESET” button to select

one of the following indicator light
activity settings:

The indicator light stays on
when activated. (This setting
is selected when the indicator
light stays on.)

U14B10E0.book Page 13 Friday, November 21, 2008 9:38 AM

Advertising