Yamaha YZFR1Y(C) - Manual (Page 65)

PERIODIC MAINTENANCE AND ADJUSTMENT
7-10
7
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections on the cowling
into the slots as shown.
3. Install the quick fasteners and the
quick fastener screws.
EAU47242
Cowlings C and D
To remove one of the cowlings
1. Remove cowling A (if removing
cowling C) or cowling B (if remov-
ing cowling D). (See page 7-9.)
2. Remove the quick fastener
screws.
3. Slide the cowling forward to un-
hook its projection from the slot,
and then pull the cowling off.
1. Turn signal light lead coupler
1. Slot
2. Projection
1
2
1
1. Slot
2. Projection
1 2
1. Cowling C
2. Quick fastener screw
1. Slot
2. Projection
2 2
2 2
1
1
2
U14B10E0.book Page 10 Friday, November 21, 2008 9:38 AM