Yamaha TG500 - Manual (Page 176)

164
VOICE EDIT MODE / 4: Recall/Init.
4-2: INITIALIZE
4-2: INITIALIZE
When you want to program a totally new voice “from scratch,” rather than editing
an existing voice, use this function to initialize all voice parameters.
VCE Initialize
Press [ENTER] to begin the initialize procedure. The following confirmation
display will appear:
VCE Initialize Sure?
Press [+1/YES] to confirm that you want to go ahead with the initialize operation
(which will erase all current edited data), or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the voice data has been
initialized.
For initial voice parameter, see page 284.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Recall/Init. -> [ENTER] -> 4-2: Initialize -> [ENTER]