Yamaha TG500 - Manual (Page 234)

222
UTILITY MODE / WAVE EDIT MODE / 1: System
1-3: OUTPUT
1-3: OUTPUT
Output
Range: norm, indiv
When set to “norm,” the stereo outputs (OUTPUT L and R) and individual
outputs 1 and 2 are active. In this case individual outputs 3 and 4 can not be
used.
When “indiv” is selected individual outputs 3 and 4 can also be used. In
this case voices assigned to individual outputs 1, 2, 3 and 4 are not delivered
via the stereo output and phone jacks. The sound of the effects delivered via
the stereo outputs may vary slightly when “indiv” is selected.
This parameter determines which of the TG500’s outputs are active.
UTL SYSTEM
Output= norm
[UTILITY/SELECT] -> 1: System -> [ENTER] -> [PAGE] -> 1-3: Output -> [ENTER]