1: midi control – Yamaha TG500 User Manual

Page 235

Advertising
background image

223

UTILITY MODE / WAVE EDIT MODE / 2: Controller

2-1: MIDI CONTROL

2-1: MIDI CONTROL

The four parameters provided in this screen allow any MIDI control device num-

bers to be assigned to TG500 controllers 1, 2, 3, and 4 (MC1, MC2, MC3, and
MC4).

UTL CTRL MC   (Mod.Whl.)

 1:001 2:004 3:018 4:109

MIDI Controllers 1 … 4

Range: 000 … 119

Position the cursor at the controller number you want to assign (TG500

controller numbers appear to the left of the colon in each parameter), then use
the [-1/NO] and [+1/YES] keys to assign the desired MIDI control change
number. Some controller numbers are assigned to specific control devices (see
list below), while others have no specific controller assignment. If a control
device is assigned to the selected MIDI control number, an abbreviation of the
device name appears in parentheses in the upper right corner of the display.

For example, set the controller 1 parameter to “001” if you want the modu-

lation wheel on the keyboard connected to the TG500 to function as Controller
1 (“MC1”).

Controllers 1 ... 4

[UTILITY/SELECT] -> 2: Controller -> [ENTER] -> [PAGE] -> 2-1: MIDI Control -> [ENTER]

Advertising