Yamaha TG500 - Manual (Page 252)

240
UTILITY MODE / WAVE EDIT MODE / 1: Waveform
1-2: ENABLE
1-2: ENABLE
Turns waveform assignment on or off.
UTL Waveform Enable
(InitWave) of f
Enable
Range: off, on
Set to “on” to turn wave assignment on. If wave assignment is turned “off”,
“---” appears in place of the “From” and “To” parameters in the preceding
screen. This parameter can only be turned “on” if an assignable sample is
available.
Enable
[UTILITY/SELECT] -> 5: Wave -> [ENTER] -> [EDIT/COMPARE] -> 1: Waveform -> [ENTER] -> [PAGE]
-> 1-2: Enable -> [ENTER]