Card load – Yamaha TG500 User Manual
Page 260
Advertising
248
UTILITY MODE / WAVE EDIT MODE / 5: Card Load
CARD LOAD
CARD LOAD
Loads all samples from a pre-programmed card plugged into the WAVEFORM 2
card slot.
Plug the memory card containing the waveform data you want to load into the
WAVEFORM 2 slot, then press [ENTER] to begin the card load procedure.
Press [+1/YES] to confirm that you want to go ahead with the card load opera-
tion, or press [-1/NO] to cancel.
When the data has been loaded , “Completed!” will appear briefly on the display.
[UTILITY/SELECT] -> 5: Wave -> [ENTER] -> [EDIT/COMPARE] -> 5: Card Load -> [ENTER]
Advertising