Yamaha TG500 - Manual (Page 68)

56
1-4: VOICE CONTROLLER
These parameters determine how the performance layers are affected by keyboard
aftertouch response and the control devices assigned to MIDI Controller 1 and MIDI
Controller 2 (MIDI controller assignments are made via the “UTILITY” mode
“2:Controller” screen — page 223).
PERFORMANCE EDIT MODE / 1: QUICK EDIT
1-4: VOICE CONTROLLER
PFM QED VCE Ctrl[A]<AT >
Layer A LayerA LayerA
MC1 AT MC2
The layer to be edited is selected as described on page 50. The currently selected
layer is shown in square brackets on the upper display line.
AT (Aftertouch)
Range: off, LayerA, LayerB, LayerC, LayerD
The aftertouch control settings from the voice assigned to the selected layer
(LayerA, LayerB, LayerC, or LayerD) are applied to the layer being edited.
Select “off” to turn aftertouch control off for the layer being edited.
MC1 (MIDI controller 1)
Range: off, LayerA, LayerB, LayerC, LayerD
The MIDI Controller 1 settings from the voice assigned to the selected
layer (LayerA, LayerB, LayerC, or LayerD) are applied to the layer being
edited. Select “off” to turn MIDI Controller 1 off for the layer being edited.
MC2 (MIDI controller 2)
Range: off, LayerA, LayerB, LayerC, LayerD
The MIDI Controller 2 settings from the voice assigned to the selected
layer (LayerA, LayerB, LayerC, or LayerD) are applied to the layer being
edited. Select “off” to turn MIDI Controller 2 off for the layer being edited.
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> PAGE
-> 1-4 : Voice Control -> [ENTER]