Yamaha ARIUS YDP-181 - Manual (Page 35)

Handling Songs with a USB Storage Device
Owner’s Manual
35
ENGLISH
Loading a Song
Notice
If the User file (U03) on the instrument already contains data, this operation can result in
overwriting of the data. Make sure to save important data to your computer beforehand.
1.
Select a song container in the device.
After making sure that the USB storage device is connected to the instrument,
press the
[FILE] button (the “LOAD TO USER.” indicator lights). Then, while
holding the [FILE] button, press the [–/NO][+/YES] buttons to select a song
(S00 – S99). Data saved on the instrument can only be loaded back to the
instrument.
2.
Load a song to User Song (U03).
“n y” (no/yes) appears in the display. Press the [+/YES] button to load a song.
The file will automatically be loaded into the User Song (U03).
The indication “-” moves from left to right in display, indicating that save oper-
ation is in process.
Notice
While the instrument is accessing data (such as during Save, Load, Delete and Format
operations) or is mounting the USB storage device (shortly after the connection: until
the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT remove
the media from the device, and do NOT turn the power off to either devices. Doing so
may corrupt the data on either or both devices.
Notice
Do not manually change the file name on the USB storage device by using a computer;
doing so will render the file unplayable or unable for loading on the instrument.
Notice
Do not turn off the power to the instrument while flashing dashes appear in the display
(indicating the operation is in process). Doing so may damage the data.
When loading is completed, the “End” indication appears in the display, and the
song is loaded into the User Song (U03).
3.
Exit from the load operation mode.
Press the [FILE] button to exit the load operation mode. (The “FILE” indicators
turn off.)
1 3 1 2
Procedure