Keyboard stand assembly – Yamaha ARIUS YDP-181 User Manual

Page 58

Advertising
background image

Keyboard Stand Assembly

Owner’s Manual

58

ENGLISH

Keyboard Stand Assembly

CAUTION

• Assemble the stand on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please

assemble the unit in accordance with the sequence given below.

• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten all screws upon completing assembly of the unit.
• To disassemble the unit, reverse the assembly sequence given below.

Remove all parts from the package and make sure you have all of the items.

Have a Philips-head (+) screwdriver of the appropriate size ready.

B

E

D

A

C

C

Foamed styrol pads
Remove foamed styrol pads from the package, position
them on the floor, then place A on top of them.
Position the pads so that they will not hide the connectors
on the bottom of A.

A bundled pedal cord is attached to the reverse side.

6 x 20 mm long screws x 4

6 x 16 mm short screws x 4

4 x 12 mm thin screws x 2

4 x 10 mm thin screws x 2

4 x 20 mm tapping
screws x 4

Headphone hanger

Headphone hanger

Cord holders x 2

Power cord

Assembly Parts

Adjuster (x 1)

Advertising