Yamaha CRW4416SX - Manual (Page 19)

Chapter 4 - Operation
11
Ejecting the Disc
If the CRW4416SX is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the SCSI command prohibits the eject oper-
ation while the CRW4416SX is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
If the CRW4416SX is not powered on:
Pressing the eject button will not eject the disc.
CRW441 6SX
POWER
ON/
DISC
READ/
WRITE
VOL
Press the eject
button