Yamaha Digital Sound YSP-900 - Manual (Page 33)

AUTO SETUP (IntelliBeam)
29
En
SETUP
English
■ Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular-shaped part
and two longitudinal-shaped parts) of the cardboard
microphone stand originally put together.
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal-shaped part
into the crevice of the other longitudinal-
shaped part.
3
Place the circular-shaped part on top of the
two combined longitudinal-shaped parts.
4
Place the supplied optimizer microphone on
top of the circular-shaped part.
Once the optimizer microphone is firmly connected to this
unit and properly placed in your listening room, follow the
procedure below to start the AUTO SETUP procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP on the remote control
for more than 2 seconds. In this case, this unit performs
both of the beam optimization and sound optimization
procedures.
Optimizer
microphone
Center line
1 2
3 4
Using AUTO SETUP (IntelliBeam)
POWER POWER STANDBY/ON
STEREO MY BEAM
INPUT2
TV
TV
2 1
SLEEP
CH LEVEL MENU
RETURN TEST
ENTER
SURROUND
OFF
SPORTS
AV
3
4 5 6
7 8 9
0 +10
5BEAM ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP INPUTMODE
MACRO INPUT1
AUX
YSP
TV/AV
TV
STB VCR DVD
STANDBY/ON VOLUME + +