Yamaha Digital Sound YSP-900 - Manual (Page 39)

USING THE SYSTEM MEMORY
35
En
SETUP
English
5
Press / to select MEMORY1,
MEMORY2 or MEMORY3 and then press
ENTER.
The following screen appears on your TV.
6
Press ENTER again.
The new parameters are saved as MEMORY1,
MEMORY2 or MEMORY3. Once the parameters are
saved, the display returns to the SET MENU screen.
7
Press MENU to exit.
The SET MENU screen disappears from your TV.
You can recall the settings saved in “Saving settings” on
page 34 according to the varying conditions of your
listening environment.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
2
Press MENU on the remote control.
The SET MENU screen appears on your TV.
y
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the front
panel display.
3
Press / to select MEMORY and then
press ENTER.
The following screen appears on your TV.
ENTER ENTER
MEMORY1 Save Now ?
Push [ENTER] to Save
2)MEMORY SAVE
MEMORY1 Saving
2)MEMORY SAVE
ENTER
; MEMORY
; AUTO SETUP
; MANUAL SETUP
; LANGUAGE SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter
SET MENU
.
p
p
MENU
Loading settings
YSP
TV/AV
MENU
; MEMORY
; AUTO SETUP
; MANUAL SETUP
; LANGUAGE SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter
SET MENU
.
p
p
ENTER ENTER
1)LOAD
2)SAVE
[ ]/[ ]:Up/Down
[ENTER]:Enter
;MEMORY
.
p
p