Enjoying stereo sound, Stereo playback, Using sound field programs – Yamaha Digital Sound YSP-900 User Manual

Page 50: What is a sound field

Advertising
background image

ENJOYING STEREO SOUND

46

En

You can enjoy 2-channel stereo playback by changing the
beam mode to the stereo playback using the beam mode
buttons on the remote control. The normal sounds are
output from the front and left channels in the 2-channel
stereo. This is ideal for playing back hi-fi sources, such as
CDs, and can be used to replace your TV speakers.

1

Set the operation mode selector to YSP to
switch to the operation mode of this unit.

2

Press STEREO on the remote control to
select the stereo playback as a beam mode.

• When you play back multi-channel sources, all signals except

those for the front left and right channels are mixed down and
output from the front left and right channels. No audio is output
from the center and rear channels.

• The surround mode becomes disabled when the stereo playback

is selected as the beam mode.

• When you play back Dolby Digital audio signals in the stereo

playback, the dynamic range becomes compressed. If the
volume level decreases to the extreme, use other beam modes
except the my beam.

• If the stereo playback is selected as the beam mode, the

surround modes (see page 42) and the CINEMA DSP programs
(see page 50) become ineffective.

ENJOYING STEREO SOUND

Stereo playback

STEREO

MY BEAM

2

1

SLEEP

CH LEVEL

MENU

RETURN

TEST

SURROUND

OFF

SPORTS

3

4

5

6

7

8

9

0

+10

5BEAM

ST+3BEAM

3BEAM

MUSIC

MOVIE

VOL MODE

AUTO

SETUP INPUTMODE

YSP

TV/AV

ENTER

YSP

TV/AV

4

STEREO

Notes

Advertising