Yamaha Digital Sound YSP-900 - Manual (Page 66)

62
En
MANUAL SETUP
TREBLE GAIN (Treble gain)
Use to adjust the high frequency output level of each
channel.
y
If the reflection point of the front left and right or surround left
and right sound beams is a curtain or other acoustically absorbent
surface, you can achieve more effective surround sound by
increasing the treble level for those sound beams.
Choices: –12.0 dB to +12.0 dB
Initial setting: 0 dB
• FL adjusts the high frequency output level of the front
left channel.
• FR adjusts the high frequency output level of the front
right channel.
• C adjusts the high frequency output level of the center
channel.
• SL adjusts the high frequency output level of the
surround left channel.
• SR adjusts the high frequency output level of the
surround right channel.
■ IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and
right channel sound is heard so that the each sound can be
heard closer to the center channel.
Use this feature to redirect audio signals if the sound
coming from the front left and right seems unnatural, such
as when your listening position is not the center of your
listening room.
You can only adjust this parameter when 3 beam or 5
beam is selected as the beam mode (see page 40).
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.
-5beam+
Front L ;;;;;;;;0dB
Front R ;;;;;;;;0dB
Center ;;;;;;;;;0dB
Surround L ;;;;;0dB
Surround R ;;;;;0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
d)TREBLE GAIN
p
p
.
p p
------
------
------
------
------
p
OFF )ON
L C R
LEFT;;;;;;;;;;;0%
RIGHT;;;;;;;;;;0%
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
C)IMAGE LOCATION
p
p
.
p p
Without adjustment
With the front left
channel adjusted
Without adjustment
With the front right
channel adjusted