Maintenance, Optional remote control transmitter, English – Yamaha KX-10 User Manual

Page 13: Remote control operation range

Advertising
background image

13

ENGLISH

MAINTENANCE

CLEANING OF THE TAPE PATH
Continued high quality performance of your deck is
dependent upon periodic cleaning of the heads, capstan,
pinch roller, and all surfaces over which the tape travels.
Normal use will cause an accumulation of dirt and dust on
the heads, capstans, and pinch rollers. This can lead to
poor sound quality, drop outs (intervals with no sound),
unsteady tape speed, loss of high frequency response, etc.
Thus, clean the heads and all surfaces over which the tape
travels with a commercially available cleaning cassette.

DEMAGNETIZATION
After 20-30 hours of use, enough residual magnetism will
build up on the heads to cause poor high frequency
reproduction. At this time you should use a commercially
available head demagnetizer.

When demagnetizing the heads, be sure to follow the
instructions of the head demagnetizer carefully.

30°

30°

OPTIONAL REMOTE CONTROL TRANSMITTER

Remote sensor

6 m (20 feet)

These shaded
buttons control
this deck.

With the optional remote control transmitter RS-KX1, you
can operate this unit at your listening position. For details,
refer to the instruction manual supplied with the remote
control transmitter.

REMOTE CONTROL OPERATION RANGE

RESET

MEMORY

REMAIN

TAPE

COUNTER

DUBBING

INTRO SCAN

SEARCH

DECK A/B

DIR A

DIR B

MONITOR

PLAY

REC/PAUSE

STOP

REC MUTE

!

!

s

REMOTE
CONTROL
TRANSMITTER

Advertising