Setting the demo mode – Yamaha YSP-500 User Manual
Page 76
74
En
Adjusting the system parameters
3
Press
/
so that “TURN ON VOLUME” is
displayed in the front panel display.
4
Press ENTER.
5
Press / to adjust the initial volume level.
Control range: MAX, 99 to 01, OFF
Control step: 1
6
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
You can test the sound beam output from this unit to
experience the sound beam.
1
Repeat steps 1 to 3 in “Using the system
parameters” on page 71.
2
Set the operation mode selector to YSP.
3
Press
/
so that “DEMO MODE” is
displayed in the front panel display.
4
Press ENTER.
ENTER
T U R N
X
O N
X
V O L U M E
ENTER
ENTER
STANDBY/ON
Setting the DEMO MODE
YSP
TV/AV
ENTER
D E M O
X
M O D E
ENTER