Yamaha YSP-500 - Manual (Page 86)

84
En
Remote control features
■ Setting macros for the TV without the
tuning capability
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
2
Press MACRO while holding down CODE
SET.
3
Press INPUT1.
Check that the TV screen changes to the input 1
screen.
4
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
5
Press ENTER to confirm the setting.
■ Operating macros
Press and hold one of the input selector buttons
for approximately two seconds to select the input
source you want to operate macros for.
The TV input changes at the same time the input mode
changes.
■ Canceling the macros
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
2
Press MACRO while holding down CODE
SET.
3
Press ENTER to cancel the macros.
TV MUTE
CODE SET
While holding
down, press
AUX DVD VCR STB
TV MUTE
CODE SET
MACRO
While holding
down, press
INPUT1
TV INPUT
ENTER
AUX DVD VCR STB
TV MUTE
CODE SET
While holding
down, press AUX DVD VCR STB
TV MUTE
CODE SET
MACRO While holding
down, press
ENTER