Yamaha YSP-500 - Manual (Page 9)

Controls and functions
7
En
INTR
ODUCTION
English
1 INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO
SETUP (see page 32).
2 Front panel display
Shows information about the operational status of this
unit.
3 Remote control sensor
Receives infrared signals from the remote control.
4 INPUT
Press repeatedly to switch between input sources (see
page 41).
Outputs a test tone to experience the sound beam (see
page 74).
5 VOLUME +/–
Controls the volume level of all audio channels (see
page 43).
6 STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 27).
• When you turn on this unit, you will hear a click sound
followed by the 4 to 5-second interval before sound
reproducing.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
Controls and functions
Front panel
INTELLIBEAM MIC INPUT VOLUME STANDBY/ON
1 4 2 6 5 3
Notes