Pioneer CDJ-500II - Manual (Page 9)

9
En
<DRB1223>
TRACK
T I M E
REMAIN
M S F
RELOOP PLAYING ADDRESS 222 333
MASTER TEMPO TEMPO
I
È
i
LOOP AUTO CUE
1
TRACK number display
The track number being played is displayed.
2 Time display (TIME/REMAIN)
The elapsed playback time of the track being played
(TIME) or remaining playback time of the track being
played (REMAIN) is displayed in minutes (M), seconds
(S), or frames (F).
3 MASTER TEMPO indicator
This indicator lights up when the MASTER TEMPO
function is carried out.
4
Playback tempo (TEMPO) display
The playback tempo being adjusted with the TEMPO
control knob is displayed (up to ±10% in steps of
0.1%).
5 Pitch indicator (
I, È, i )
I: The pitch of playback is decreased.
È: Normal pitch of playback
i: The pitch of playback is increased.
6 AUTO CUE indicator
This indicator lights up when the AUTO CUE function
is carried out.
7
Jog dial operation indicator (
222 /
333 )
The indicator lights according to the rotating direction
or speed of the Jog dial.
8 Playback address display (PLAYING
ADDRESS)
The elapsed playback time or remaining playback time
of the track being played is roughly indicated with the
full-scaled bar graph.
÷ When no disc is in the
disc compartment ..................................... goes off
÷ When displaying the elapsed
playback time ............... lights up from the left side
÷ When displaying the remaining
playback time ................ goes off from the left side
÷ When the remaining playback time is
less than 30 seconds .................................... blinks
9 RELOOP indicator
This indicator lights up when loop playback is possible,
with the loop-in point (start point) and loop-out point
(end point) stored in memory.
0 LOOP indicator
This indicator lights during loop playback.
8 7
Display Window
2 5 4 3 1
0 9
PANEL FACILITIES
6