F)zone set, G)xm radio set, H)dock set – Yamaha HTR-6090 User Manual

Page 103

Advertising
background image

99

En

CUSTOMIZING THIS UNIT (MANUAL SETUP)

AD

V

ANCED

OPE

R

A

T

IO

N

Zone set

F)ZONE SET

Zone 2 volume

ZONE2 VOL

Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR, FIX
• Select “VAR” to adjust the ZONE 2 OUTPUT volume

simultaneously with VOLUME +/– on the remote
control.

• Select “FIX” to fix the ZONE 2 OUTPUT volume level

to a standard line level.

Zone 2 amplifier

ZONE2 AMP

Use to select how the ZONE 2 speakers are amplified.
Choices: EXT, [SP1]
• Select “EXT” if you want to connect your Zone 2

speakers through an external amplifier connected to the
ZONE 2 OUTPUT jacks on the rear panel of this unit.

• Select “[SP1]” to use the internal surround back

amplifier of this unit when you want to connect your
Zone 2 speakers directly to the SP1 speaker terminals
on the rear panel of this unit.

• When “BI-AMP” is set to “ON” in the “ADVANCED SETUP”

menu, “[SP1]” cannot be selected.

• When you use internal amplifiers for Zone 2, some surround

field programs may not work in the same way as when you do
not use the internal amplifiers for Zone 2.

XM Radio setting

G)XM RADIO SET

XM Radio antenna

XM ANTENNA

Use this feature to check the current reception level of the
XM Passport System connected to the XM jack of this
unit (see page 60). For the best reception, orient the XM
Passport System so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%

• “NONE” is displayed if the XM Passport System is not connected to

this unit. In this case, check the antenna connections (see page 60).

• The “XM ANTENNA” parameter cannot be adjusted by using

the remote control. Instead, you need to adjust the orientation of
the XM Passport System connected to the XM jack of this unit
for a better percentage of the reception level.

Dock set

H)DOCK SET

Charge on standby

STANDBY CHRG

Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode (see page 72).
Choices: AUTO, OFF
• Select “AUTO” to charge the battery of the stationed

iPod when this unit is turned on and in the standby
mode.

• Select “OFF” to charge the battery of the stationed

iPod only when this unit is turned on.

Notes

. ZONE2 VOL;;;;VAR

ZONE2 AMP

;;;;EXT

F)ZONE SET

[ ]/[ ]:Up/Down
[ ]/[ ]:Adjust

p

p

[

p

Notes

G)XM RADIO SET

. XM ANTENNA;;NONE

H)DOCK SET

. STANDBY CHRG;AUTO

[ ]/[ ]:Adjust
[ENTER]:Return

)

)

01EN_00_HTR-6090_U.book Page 99 Tuesday, June 27, 2006 6:40 PM

Advertising