Yamaha HTR-6090 - Manual (Page 11)

CONTROLS AND FUNCTIONS
7
En
IN
TR
ODUC
TI
ON
0 MACRO ON/OFF
Turns on or off the macro function (see page 106).
A MACRO
Programs a series of operations to be controlled with a
single button (see page 106).
B STANDBY
Sets the main zone to the standby mode (see page 30).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
C POWER
Turns on the main zone (see page 30).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
D AUDIO SEL
Toggles the priority for the type of audio input jack
between “AUTO”, “HDMI”, “COAX/OPT” and
“ANALOG” when one component is connected to two or
more input jacks (see page 39).
E SLEEP
Sets the sleep timer (see page 42).
F MULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 40).
G SELECT k / n
Selects another input source that you can control
independently of the input source selected with the input
selector buttons.
H Operation mode selector
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 101).
TV
Operates the TV assigned to either DTV or PHONO
(see page 100).
• To set the remote control codes for other components, see
page 102.
• When you set the remote control codes for both DTV and
PHONO (see page 102), priority is given to the one set for
DTV.
I VOLUME +/–
Increases or decreases the volume level.
J MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 40).
K PURE DIRECT
Turns on or off the pure direct mode (see page 49).
L SET MENU
Enters “SET MENU” (see page 85).
M PARAMETER
Displays sound field parameter settings in the on-screen
display (OSD) (see page 75).
N STRAIGHT
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 48).
O EXTD SUR.
Switches between 5.1 and 6.1/7.1-channel playback of
multi-channel sources (see page 79).
P SELECT
Selects decoders for 2-channel sources (see pages 79 and
81).
Q ENHANCER
Turns on or off the Compressed Music Enhancer mode
(see page 51).
R NIGHT
Turns on or off the night listening modes (see page 52).
S RENAME
Changes the name of the input source in the display
window (see page 105).
T CLEAR
Clears remote control functions acquired from the learn,
macro and/or rename features (see page 109).
U LEARN
Programs remote control codes of functions from other
remote controls (see page 104).
Note
Note
Notes
01EN_00_HTR-6090_U.book Page 7 Tuesday, June 27, 2006 6:40 PM