Yamaha HTR-6090 - Manual (Page 19)

15
En
CONNECTIONS
PRE
P
ARA
T
ION
5
Hook the speaker terminal wrench onto the
WRENCH HOLDER on the rear panel of this
unit when not in use.
■ Connecting the banana plug
The banana plug is a single-pole electrical connector
widely used to terminate speaker cables.
1
Tighten the knob using the supplied speaker
terminal wrench.
2
Insert the banana plug connector into the
end of the corresponding terminal.
Banana plug
Red: positive (+)
Black: negative (–)
Speaker terminal wrench
01EN_00_HTR-6090_U.book Page 15 Tuesday, June 27, 2006 6:40 PM