Yamaha HTR-6090 - Manual (Page 24)

20
En
CONNECTIONS
Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
y
You can select to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the
rear panel of this unit. Use the “SUPPORT AUDIO” parameter in “SOUND MENU” to select the component to play back HDMI audio
signals (see page 92).
• Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they
are in the standby mode. In this case, the HDMI indicator flashes irregularly.
• Set “V CONV.” in “OPTION MENU” to “ON” (see page 96) to display the short message display and parameter displays.
• Set “GRAY BACK” in “OPTION MENU” to “ON” (see page 96) to display the parameter displays.
• The SET MENU and parameter displays appear with the gray background depending on the input video signal format and the setting
of the parameters in “DISPLAY SET” (see page 96).
Connecting a TV monitor or projector
Notes
CAUTION
VIDEO
S VIDEO
MONITOR OUT
COMPONENT VIDEO
HDMI
MONITOR OUT
Y
P R
P B
OUT
P R P B V
S
Y
TV (or projector)
Video in Component video in
S-video in HDMI in
indicates recommended connections
indicates alternative connections
01EN_00_HTR-6090_U.book Page 20 Tuesday, June 27, 2006 6:40 PM