Yamaha HTR-6090 - Manual (Page 43)

39
En
PLAYBACK
BA
S
IC
OPERA
T
ION
This unit comes with a variety of input jacks. Use this
feature (Audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting Audio input jack select to “AUTO” in
most cases.
• You can adjust the default Audio input jack select of this unit by
using “AUDIO SELECT” in “OPTION MENU” (see page 98).
1
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
2
Press AUDIO SELECT on the front panel (or
AUDIO SEL on the remote control) repeatedly
to select the desired Audio input jack select
setting.
AUTO Automatically selects input signals in
the following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When
HDMI signals are not input, no sound
is output.
COAX/OPT Automatically selects input signals in
the following order:
(1) Digital signals input at the
COAXIAL jack.
(2) Digital signals input at the
OPTICAL jack.
When no signals are input, no sound is
output.
ANALOG Selects only analog signals. If no
analog signals are input, no sound is
output.
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. In
addition, HDMI is not available as an Audio input jack
select setting when the HDMI IN 1 and HDMI IN 2 jacks
are not used. Use “I/O ASSIGNMENT” in “INPUT
MENU” to reassign the respective input jack (see page 93).
Selecting audio input jacks
(AUDIO SELECT)
INPUT
V-AUX/DOCK
DTV DVR/VCR 2 VCR 1 DVD
CBL/SAT MD/TAPE CD-R
PHONO CD MULTI CH IN
or
Front panel Remote control
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE DVD DTV VCR 1 CBL/SAT DVR/VCR 2 V-AUX
A.SEL: AUTO
AUDIO SEL
Currently selected
Audio input jack
select setting
Available input sources
or
AUDIO SELECT
Note
01EN_00_HTR-6090_U.book Page 39 Tuesday, June 27, 2006 6:40 PM