Yamaha HTR-6090 - Manual (Page 52)

48
En
SOUND FIELD PROGRAMS
■ Using sound field programs without
surround speakers (Virtual CINEMA
DSP)
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
When you set “SUR. L/R SP”
to “ NONE” (see page 87),
Virtual CINEMA DSP activates automatically whenever
you select a CINEMA DSP sound field program (see
page 44).
Virtual CINEMA DSP will not activate even when “SUR. L/R
SP” is set to “NONE” (see page 87) in the following cases:
– when the component connected to the MULTI CH INPUT
jacks is selected as the input source (see page 40).
– when headphones are connected to the PHONES jack.
– when the Pure Direct (see page 49) or “2ch Stereo” mode (see
page 50) is selected, or when this unit is in the “STRAIGHT”
mode (see page 48).
■ Enjoying multi-channel sources and
sound field programs with headphones
(SILENT CINEMA)
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
activates automatically whenever you connect headphones
to the PHONES jack while listening to CINEMA DSP or
HiFi DSP sound field programs (see page 44). When
activated, the SILENT CINEMA indicator lights up in the
front panel display.
• SILENT CINEMA does not activate when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 40).
• SILENT CINEMA is not effective when the Pure Direct (see
page 49) or “2ch Stereo” mode (see page 50) is selected, or
when this unit is in the “STRAIGHT” mode (see page 48).
When this unit is in the “STRAIGHT” mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel sources are decoded straight into
the appropriate channels without any additional effect
processing.
Press STRAIGHT on the front panel (or on the
remote control) to select “STRAIGHT”.
■ Deactivating the “STRAIGHT” mode
Press STRAIGHT on the remote control so that
“STRAIGHT” disappears from the front panel
display.
The sound effect is turned back on.
Note
Notes
Enjoying unprocessed input
sources
Format Description
Dolby Digital
Standard processing for Dolby
Digital sources.
DTS
Standard processing for DTS
sources. When the input source is
DTS-ES Discrete or DTS-ES
Matrix format, the respective
indicator appears in the front
panel display.
DSD
Plays back DSD (Direct Stream
Digital) sources.
PCM
Plays back PCM (Pulse Code
Modulation) sources.
MPCM
Plays back multi-channel PCM
(Pulse Code Modulation) sources.
Analog Plays back analog sources.
EFFECT
STRAIGHT
STRAIGHT
STRAIGHT
EFFECT
or
EFFECT
STRAIGHT
STRAIGHT
EFFECT
or
01EN_00_HTR-6090_U.book Page 48 Tuesday, June 27, 2006 6:40 PM