Yamaha HTR-6090 - Manual (Page 86)

82
En
ADVANCED SOUND CONFIGURATIONS
■ Selecting decoders for multi-channel
sources
If you connected surround back speakers, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
1
Set the operation mode selector to AMP and
then press EXTD SUR. on the remote control
repeatedly to switch between 5.1 and 6.1/7.1-
channel playback.
2
Press l / h repeatedly to select a decoder
while the name of the decoder is displayed.
Auto AUTO
When a signal flag that can be recognized by this unit is
input, this unit selects the optimum decoder to play back
the signal in 6.1/7.1 channels.
If this unit cannot recognize the flag or no flag is present
in the input signal, it cannot automatically be played in
6.1/7.1 channels.
Decoders
You can select from the following decoders depending on
the format of the source you are playing.
Off OFF
Decoders are not used to create 6.1/7.1 channels.
• “PLIIx Movie” is available only when “SB L/R SP” (see
page 88) is set to “SMLx2” or “LRGx2”.
• Some 6.1/7.1-channel compatible discs do not have a signal flag
that can be automatically detected by this unit. When playing
these kinds of discs in 6.1/7.1 channels, select a decoder
manually from “PLIIx Music”, “EX/ES” or “EX”.
• 6.1/7.1-channel playback is not possible even if you press
EXTD SUR. in the following cases:
– when “SUR. L/R SP” (see page 87) or “SB L/R SP” (see
page 88) is set to “NONE”.
– when the component connected to the MULTI CH INPUT
jacks is being played.
– when the source being played does not contain surround left
and right channel signals.
– when a Dolby Digital KARAOKE source is being played.
– when the “2ch Stereo” (see page 50) or Pure Direct (see
page 49) mode is selected.
• When this unit is turned off, this setting will be reset to
“AUTO”.
• The Pro Logic IIx decoder is not available when “SB L/R SP” is
set to “NONE” (see page 88).
8
EXTD SUR.
TV
SOURCE
AMP
ENTER
A-E/CAT.
PRESET/CH
Decoder Functions
PLIIxMovie
q D+PLIIx Movie
DTS+PLIIx Movie
MPCM+PLIIx Movie
DSD+PLIIx Movie
Plays back multi-channel
sources in 7.1 channels using
the Pro Logic IIx movie
decoder.
PLIIxMusic
q D+PLIIx Music
DTS+PLIIx Music
MPCM+PLIIx Music
DSD+PLIIx Music Plays back multi-channel
sources in 6.1/7.1 channels
using the Pro Logic IIx music
decoder.
DTS ES
DTS 96/24 ES
Plays back DTS signals in 6.1/
7.1 channels using the DTS-ES
decoder.
DOLBY D EX
DTS+DOLBY EX
MPCM+DOLBY EX
DSD+DOLBY EX Plays back multi-channel
sources in 6.1/7.1 channels
using the Dolby Digital EX
decoder.
Notes
01EN_00_HTR-6090_U.book Page 82 Tuesday, June 27, 2006 6:40 PM