Yamaha HTR-6090 - Manual (Page 87)

CUSTOMIZING THIS UNIT (MANUAL SETUP)
83
En
AD
V
ANCED
OPE
R
A
T
IO
N
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup
AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 31).
■ Manual setup
MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Basic menu 1 BASIC MENU
Use this menu to manually adjust basic system parameters.
Sound menu 2 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Parameter Features Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the
crossover frequency.
86
B)SP LEVEL Adjusts the output level of each speaker. 89
C)SP DISTANCE Adjusts the delay time of each speaker. 89
D)TEST TONE
Turns the test tone output on or off for the SPEAKER SET, SPEAKER LEVEL and SP
DISTANCE setting.
90
Parameter Features Page
A)EQUALIZER Adjusts the tonal quality of the center speaker. 90
B)LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 91
C)DYNAMIC RANGE Adjusts the dynamic range of Dolby Digital or DTS signals. 91
D)AUDIO SET Adjusts the muting level, audio delay and tone bypass settings. 92
E)HDMI SET Selects the component to play back HDMI audio signals. 92
01EN_00_HTR-6090_U.book Page 83 Tuesday, June 27, 2006 6:40 PM