Yamaha DPX-530 - Manual (Page 39)

35
◆
Projector specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Type DLP™ projector
Model DPX-530
Display Technology 0.65-inch Single chip DMD (Aspect ratio 16:9)
Pixel 1024 × 576 = 589824 pixels
Projection lens F 2.4 – 2.6 f= 23 – 27.6 mm
Light-source lamp 250 W
Image size (Projection distance) 40" min. to 275" max. (Projection distance 1.3 to 10 m)
Maximum number of display colors 16770000 (full-color display)
Maximum resolution Computer signal Maximum resolution: 1280 x 1024 dots (Analog) / compressed
Panel resolution: 1024 × 576 dots
Video signal NTSC / PAL / SECAM / 4.43NTSC / PAL-M / PAL-N / PAL-60
Component signal 480i, 480p, 576i, 576p, 720p, 1080i
Panel resolution: 1024 × 576 dots
Input terminal [Signal type]
Analog RGB
Digital RGB
Video input
S-Video input
Component video input [Terminal type]
D-SUB 15P
DVI-D
RCA × 1
S
RCA × 3, D-SUB 15P [Line]
1
1
1
1
2
Control terminal/Others RS-232C (8P): For service person
Operating temperatures +41°F (+5°C) to +95°F (+35°C)
Rated voltage AC100 - 240V, 50/60Hz
Power consumption 3.5 A
Dimensions 360 mm (W) × 102 mm (H) × 290 mm (D) *Not including protrusions.
Weight 3.9 kg
Others S-video input Luminance signal: Vp-p=1.0 V 75
Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75
Ω (burst signal)
Video input Vp-p=1.0 V 75
Ω (negative sync)
Component video
input YC
B
C
R
: Vp-p=1.0 V 75
Ω (Y) (negative sync)
Vp-p=0.7 V 75
Ω (C
B
, C
R
)
Analog RGB input RGB: Vp-p=0.7 V 75
Ω (negative sync)
HD: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital RGB input DVI interface (TMDS single link)
Specifications 16