Yamaha PJP-100UH - Manual (Page 11)

PREPARATION PROCEDURE
7
PRE
P
ARA
T
ION
English
The following preparation steps should be completed before using this unit.
■ Connection of a PC through a USB cable
Step 1: (page 8)
Connect this unit to the PC and turn them on.
↓
Step 2: (page 9)
Change the settings of the PC connected to this
unit.
↓
Step 3: (page 11)
Install this unit in the conference room.
■ Connection of a PC through audio
connection cables
Step 1: (page 12)
Connect this unit to the PC and turn them on.
↓
Step 2: (page 13)
Change the settings of the PC connected to this
unit.
↓
Step 3: (page 11)
Install this unit in the conference room.
y
For the connection method of two PJP-100UH units (coupled
connection), see page 14.
■ Notes on system connection
Please check the following before proceeding to
preparation.
USB cable (For use in USB connection of
PC)
Prepare an authorized cable carrying the USB logo.
Audio connection cables (For use in non-
USB connection of PC or external
equipment)
Prepare two audio connection cables (stereo mini-jack
cables).
Specifications of the connected PC
The PC connected to this unit should meet the following
system requirements.
• CPU: Intel Pentium/Celeron processor with 750 MHz
or higher (or equivalent)
• OS: Windows XP Professional, Windows XP Home
Edition or Windows 2000 Professional
• Memory: 128 MB or more (256 MB or more
recommended)
• USB port: USB 1.1 or after (USB 2.0 compatible
recommended)
• Connect this unit and PC directly. Connecting them through a
USB hub may cause problems in operation.
• Audio reproduction may be interrupted depending on the PC
usage situations (workloads or available memory space).
PREPARATION PROCEDURE
Notes
01EN_00_PJP-100UH_UCGB.book Page 7 Wednesday, August 23, 2006 1:49 PM