Yamaha PJP-100UH - Manual (Page 16)

CONNECTION USING AUDIO CONNECTION CABLES
12
In addition to the PC connection through a USB cable, this unit can be connected to a PC or TV conference system
through audio connection cables. Use the following procedure for the connections and settings.
Prepare two commercially available audio connection cables (stereo mini-jack cables).
The following description assumes that the input/output terminals of the PC are colored for distinction. If your PC does not have the
colored terminals, consult the instruction manual for you PC to confirm the functions and locations of the input/output terminals before
connection.
1
Connect the AUDIO IN jack of this unit to the
audio output terminal of the PC or Video
Conference system.
For connection of a PC, connect the cable to the green
terminal of the PC.
2
Connect the AUDIO
OUT jack of this unit to
the audio input terminal of the PC or Video
Conference system.
For connection of a PC, connect the cable to the blue
terminal of the PC.
Do not connect the cable to the microphone input
terminal (which is red with the PC) of the PC or
Video Conference system. Otherwise, an excessive
input signal level may degrade the audio quality.
CONNECTION USING AUDIO CONNECTION CABLES
Connecting audio connection cables
Note
1
2
(Blue terminal on PC)
To audio input terminal
To audio output terminal
(Green terminal on PC)
Note
01EN_00_PJP-100UH_UCGB.book Page 12 Wednesday, August 23, 2006 1:49 PM