Yamaha KX W482 - Manual (Page 9)

9
Up to 8 times
5
RELAY PLAYBACK - To play DECK A and DECK B sequentially
Load the cassette tapes into DECKs A and B, start playback of DECK A.
Set the MODE selector to the RELAY position.
DECK A (forward side \ reverse side) \ DECK B (forward side \ reverse side)
When the level of high frequencies is too boosted or absent while playing a tape recorded on another cassette deck, adjust the
high frequency response with the PLAY TRIM control.
PLAY TRIM control adjustment
s
DECK B DECK A
MODE
PLAY TRIM
When high frequencies are too loud,
attenuate the high frequencies.
PLAY TRIM
0
+ –
PLAY TRIM
+ –
0
1
High frequency sound is too loud.
2
Flat
3
High-frequency sound is too soft.
When high frequencies are too soft, boost
the high frequencies.
100
10 dB
1k 10kHz
+
_
1
2
3