Expanding the geq modules, Basic graphic eq operations, Controlling the graphic eq from the display – Yamaha DSP5D User Manual

Page 119

Advertising
background image

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Operating section

119

15

Graphic EQ and Parametric

Expanding the GEQ modules

The GEQ modules provided by the PM5D can be expanded to a maximum of 20 modules by re-purposing the eight internal
effects.

1

In the DISPLAY ACCESS section, repeatedly
press the [GEQ] key to access the GEQ ASSIGN
screen.
In this screen, you can view the overall settings and
input/output levels for the GEQ modules, specify the
signal routing, and turn the module on/off.

2

In the DSP CONFIGURATION box located in
the lower right of the screen, click the left/
right / buttons to change the number of
internal effects and GEQ modules that will be
assigned.
If twelve GEQ modules are used, there will be eight
internal effects. If twenty GEQ modules are used, no
internal effects will be available.

Basic graphic EQ operations

There are two ways to control a graphic EQ; using the virtual faders and buttons within the display, or using the DCA faders of
the panel.

Here’s how to control the desired graphic EQ by using the
faders and buttons shown in the GEQ PARAM screen
(GEQ function).

1

In the DISPLAY ACCESS section, repeatedly
press the [GEQ] key to access the GEQ PARAM
screen.

GEQ ASSIGN

DSP CONFIGURATION box

Controlling the graphic EQ from the
display

MODULE box

Spectrum analyzer

GEQ PARAM

Faders

LIMIT area

GEQ/PEQ button

Advertising