Notes regarding surround pan – Yamaha DSP5D User Manual

Page 147

Advertising
background image

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Operating section

147

18

Surround pan

Notes regarding surround pan

Here are some notes and limitations that you should be aware of when using surround pan.

Scene recall operations

• The surround mode selection and the surround pan

settings of each channel are stored as part of the scene.

• If you recall a scene whose surround mode differs from

the current scene, the screen and panel display will
change accordingly. The surround mode is recalled
regardless of Selective Recall or Recall Safe settings.

• If one channel (of a pair of channels) is excluded from

recall, and you recall a scene in which the STEREO
LINK button is on, the STEREO LINK button will
remain on but only the other channel (of the pair) will
be recalled.

• SURROUND BUS SETUP settings (MIX bus 1-8/9-16

selection, and assignments to each surround channel)
are not included in the scene data.

Channel library recall operations

• Surround pan related parameters for inputs are stored

in the input channel library.

• If the STEREO LINK button is on, and you recall input

channel library settings, the STEREO LINK button will
remain on, but only one channel will be recalled. Sub-
sequent operation will be according to STEREO LINK.

Channel copy

• When you copy an input channel using panel opera-

tions, surround-related parameters will also be copied.

• In order to copy surround-related parameters using the

CH JOB screen (INPUT VIEW function), the ALL but-
ton must be turned on in the DESTINATION area.

Global paste

• In order to paste surround-related parameters, the ALL

button must be turned on in the CURRENT SCENE
area of the GLOBAL PASTE screen (SCENE function).
In addition, the settings of the STEREO LINK area will
also be pasted if two adjacent channels are selected.

Advertising