Geq assign screen – Yamaha DSP5D User Manual

Page 173

Advertising
background image

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Reference section

173

Information shown

in the display

Function

menu

Global

functions

Output

functions

Input

functions

Appendices

This screen lists the approximate values of the GEQ mod-
ule settings, and shows the input/output levels. The signal
path assignments and on/off status can also be edited in
this screen.

A Level meter

This meter indicates the peak level before and after the
GEQ module.

B Fader graph

This indicates the approximate fader position for each
band. When you click this area, the GEQ PARAM
screen for the corresponding GEQ module will appear.
You can also drag and drop this area onto another
GEQ module to copy the GEQ settings.

C GEQ ON/OFF button

Switches the GEQ module on/off.

D Insert destination

Indicates the location at which the GEQ module is
inserted. You can also specify the insert location from
within this screen.

E LINK button

This button indicates the link status of adjacent odd-
numbered

→ even-numbered GEQ modules. When

you turn this button on, a window will appear, allow-
ing you to select whether the parameters will be copied
from one module to the other, or whether both mod-
ules will be initialized.

F DSP CONFIGURATION

This box lets you change the number of assignments
for the internal effects and GEQ modules. If you
decrease the number of internal effects, the number of
available GEQ modules will increase by one. The num-
ber of internal effects can be changed between eight
units (twelve GEQ modules) to zero available internal
effects (twenty GEQ modules).

Note

If you change the DSP CONFIGURATION setting, the inter-
nal effects or GEQ modules may be muted briefly.

GEQ ASSIGN screen

GEQ ASSIGN

5

1

2

3

4

6

Advertising