Yamaha DSP5D - Manual (Page 207)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
207
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
J UPPER PART DISPLAY
These buttons select the item that is shown in the cen-
ter right (to the right of the scene memory indication)
of the upper part of the display (the constantly dis-
played area).
• PRESENT TIME
Indicates the present time.
• TIME CODE
Indicates the internal time code being generated by the
PM5D, or the time code being received from an exter-
nal device. This is the same as the time code shown in
the SCENE function EVENT LIST screen.
• CASCADE/Fs
Indicates the master/slave status when using a cascade
connection, and the sampling frequency at which the
PM5D system is currently operating.
Hint
You can also cycle through these choices by clicking in this
display section.
K NAME DISPLAY ([NAME] indicator display)
Choose one of the following as the content that will be
shown by the [NAME] indicators of the INPUT chan-
nel strip and DCA strip.
• NAME
The indicators will show the names assigned to the
input channels / DCA groups in the NAME screen
(INPUT PATCH function). (
➥ p.282)
• PORT
For input channels, the indicators will show the name
of the currently assigned port. For DCA groups, the
indicators will show the ID number.
• ID
For both input channels and DCA groups, the indica-
tors will show the fixed ID number.
L WARNING DISPLAY
Here you can select whether a warning will be dis-
played when the following problems occur.
• TIME CODE DROP
When time code (LTC, MTC) being received from an
external device is dropped.
• DIGITAL I/O ERROR
When a DIO error is detected.
• MIDI I/O ERROR
When a MIDI error is detected.
M CHANNEL NAME NUMERIC DISPLAY
• ENCODER VALUE
When you operate an encoder (pan setting), the name
display will switch to indicating that value.
• FADER VALUE
When you operate a fader, the name display will switch
to indicating that value.
N SOFTWARE VERSION
This indicates the version of the unit’s operating soft-
ware (firmware).
O BATTERY
This indicates the voltage of the internal battery.
P POWER SUPPLY (DSP5D only)
This indicates the status of the DSP5D’s power supply.
This will indicate “INTERNAL” if the DSP5D is oper-
ating on its internal power supply, or “EXTERNAL” if
it is operating on the PW800W external power supply.
Q INTERNAL CLOCK
This indicates the year/month/day (DATE) and time
(TIME) of the internal clock.
If you want to change the setting, click the SET button.
R BACKGROUND COLOR
This specifies the screen background color for each
machine. If the PM5D and DSP5D are cascade-con-
nected, having a different background color will make
it easier to distinguish the machines when you switch
between them for control.
S NETWORK (DSP5D only)
Here you can make network settings used when the
DSP5D’s [NETWORK] connector is connected to your
computer via an Ethernet cable (
➥ p.159).
J
K
L
M
N
O
P
Q R S