Mix 1-24 screen, Matrix/stereo screen, Mix 1-24 screen matrix/stereo screen – Yamaha DSP5D User Manual

Page 255

Advertising
background image

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Reference section

255

Information shown

in the display

Function

menu

Global

functions

Output

functions

Input

functions

Appendices

J THRESHOLD (Threshold level)

Specifies the threshold level at which the compressor
will operate. The input signal will start being com-
pressed when the key-in signal exceeds this level;
compression will be removed when the signal falls
below this level.

K RATIO

Specifies the ratio at which the input signal will be
compressed when the key-in signal exceeds the thresh-
old level.

L ATTACK (Attack time)

Specifies the time from when the key-in signal exceeds
the threshold level until compression begins.

M RELEASE (Release time)

Specifies the time from when the key-in signal falls
below the threshold level until compression is
removed.

N GAIN

Specifies the output level gain.

O KNEE

Select the sharpness at which the output level changes;
the range is HARD or 1–5. HARD produces the sharp-
est change, and 5 produces the most gradual change.

These screens show the compressor settings for all output
channels. Here you can also copy compressor settings
between output channels.

A Compressor graph

This mini-graph shows the approximate compressor
response for each output channel.
When you click the graph at which the cursor is cur-
rently located, the COMP PARAM screen for that
channel will appear.
In this screen you can drag and drop the mini-graph
from the desired channel to copy its compressor set-
tings. (When you drag and drop the mini-graph, a

J

K

L

M

N

O

MIX 1-24 screen

MATRIX/STEREO screen

MIX 1-24

MATRIX/STEREO

2

1

3

4

Advertising