Yamaha DSP5D - Manual (Page 256)

OUTPUT COMP function
256
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
popup window will ask you to confirm the copy
operation.)
You can also copy compressor settings between the
MIX 1-24 screen and the MATRIX/STEREO screen.
First drag the mini-graph over the MIX 1-24 tab or
MATRIX/STEREO tab in the screen (the screen will
switch). Then drag and drop the mini-graph onto the
desired channel, and a message will ask you to confirm
the copy operation.
B Level meters
These meters show the amount of gain reduction pro-
duced by the compressor (at left), and the peak level of
the signal after passing through the compressor (at
right). If the signal clips, the OVER segment will light.
C COMP ON/OFF (Compressor on/off)
Turns the compressor on/off for that channel.
D Channel
This is the number and name of the channel you are
editing. Two paired channels are indicated by a heart
symbol displayed between them.
Here you can recall, store, rename, or delete items in the
compressor library. The contents of this screen are in com-
mon with the COMP LIBRARY screen of the INPUT
GATE/COMP function.
A EDIT
When you click this button, the COMP PARAM screen
for the currently selected channel will appear.
B Channel selection
Select the channel that you want to edit.
C Compressor graph of the selected channel
This graph shows the approximate response of the
compressor for the currently selected channel.
D Level meters
These meters show the amount of gain reduction (GR),
and the peak levels before the compressor (PRE) and
after the compressor (POST). If the signal clips, the
OVER segment will light.
COMP LIBRARY (Compressor library)
screen
COMP LIBRARY
1
2
3
4