Yamaha DSP5D - Manual (Page 261)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
261
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
C SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel EQ link group assignments. While the EQ
link group SET BY CUE button is on, pressing the
[CUE] key of a channel that can be assigned to the cor-
responding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
The SET BY CUE button can be turned on for only one EQ
link group. This is automatically turned off when you change
screens or turn off the power.
D CLEAR
This button clears all output channels assigned to that
EQ link group.
Here you can specify the output channels that will be
assigned to compressor link groups A–H. Compressor
parameters are linked for channels belonging to the same
group.
A Compressor link group
This area shows the compressor link group number.
The number corresponding to the grid where the cur-
sor is located is highlighted.
B Grid
This grid lets you assign output channels (horizontal
rows) to compressor link groups (vertical columns).
Currently-patched grids are indicated by a symbol.
Move the cursor to the desired grid and press the
[ENTER] key (or click) to set/cancel the assignment.
Hint
Input channels and output channels use separate compres-
sor link groups. Output channels use groups A–H, and input
channels use groups 1–8.
4 3
COMP LINK ASSIGN (Compressor link
assign) screen
COMP LINK ASSIGN
1 2