Yamaha DSP5D - Manual (Page 284)

INPUT HA/INSERT function
284
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
A +48V
B HPF (High Pass Filter)
C Cutoff frequency
D GAIN
E Input port
These items are the same as in the OUTPUT INSERT
function INSERT IN MIX1-24 screen and INSERT IN
MATRIX/STEREO/MONITOR screen (
➥ p.248).
F Channel
This area shows the number and name of the channel
you are editing. Two paired channels are indicated by a
heart symbol displayed between them.
Note
• Items 1 – 4 are not shown for channels to which nothing is
patched, or for channels patched to an input port that does
not have a HA. Items
2 and 3 are not shown for channels
patched to a port that has no high pass filter.
• To assign input ports to input channels, use the INPUT
PATCH screen (INPUT PATCH function).
• HA settings are not linked even if two channels are paired.
However, the GAIN knob setting is linked for HAs whose
GANG button is turned on in the HA screen (SYS/W.CLOCK
function).
G LIBRARY button
This button displays the HA LIBRARY screen
(
➥ p.230), where you can store/recall internal HA or
external HA settings as library items.
Hint
The HA settings you edit in this screen are also reflected in
the HA screen (SYS/W.CLOCK function).
Here you can make settings for internal HAs (PM5D-RH
model only) or external HAs assigned to the insert-in of
input channels.
1
2
3
5
6
4
7
INSERT 1-24 screen
INSERT 25-48 screen
INSERT STIN screen
INSERT 1-24
INSERT STIN