Yamaha DSP5D - Manual (Page 297)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
297
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
D SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel DCA group assignments. While the DCA
group SET BY CUE button is on, pressing the [CUE]
key of an input channel that can be assigned to the cor-
responding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
The SET BY CUE button can be turned on for only one DCA
group. This is automatically turned off when you change
screens or turn off the power.
E CLEAR
This button clears all input channels assigned to that
DCA group.
F MUTE
These buttons switch muting on/off for DCA groups
1–8. They are linked with DCA [MUTE] keys 1–8 in
the DCA strip of the panel.
G DCA faders
These faders adjust the levels of DCA groups 1–8. They
are linked with DCA faders 1–8 in the DCA strip.
H CUE
These buttons cue-monitor DCA groups 1–8. They are
linked with DCA [CUE] keys 1–8 in the DCA strip of
the panel.
I DCA LEVEL SET
Use the following two buttons to operate DCA groups
1–8 together.
• ALL NOMINAL
Clicking this button will move DCA faders 1–8 to
nominal level (0 dB).
• ALL MINIMUM
Clicking this button will move DCA faders 1–8 to the
–
∞ dB position.
Here you can specify the input channels that will be
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.
Except for the fact that these settings apply to input chan-
nels, the display and operations are the same as in the
OUTPUT DCA/GROUP function MUTE GROUP
ASSIGN screen. Refer to p.259.
Hint
Mute groups 1–8 can be used with both input channels and
output channels. Both types of channel can exist in the identi-
cally-numbered mute group.
5 4
8
6
7
9
MUTE GROUP ASSIGN screen
MUTE GROUP ASSIGN